RP Gray Sealant
RP Gray Sealant

 

  RP Gray Sealant
SDSspacerPDF

 

DESCRIPTION
RP GRAY HOT APPLIED SEALANT is composed of selected non-asphaltic resins, synthetic polymeric rubber, plasticizers, stabilizers, and a blend of organic reinforcing fillers. This material is a hot applied sealant that provides excellent results under varying conditions.
RP Gray Sealant is the perfect joint and crack sealant for recessed concrete joint applications.
• Superior bonding characteristics
• High weather resistance
• Gray in color
• Aesthetically pleasing on concrete and bleached out asphalt
pavements

TYPICAL PROPERTIES
Recommended pour temperature.......................................................... 370º F
Maximum heating temperature............................................................... 390º F
Recommended extended heating ......................................................12 hours
Resilience................................................................................................60% min
Penetration (150gr/5 sec.).......................................................................35 max
Flow at 140º F ......................................................................................1 mm max
Softening point ....................................................................................210º F min
Flexibility 180º bend..........................................................................Pass -20º F

USE AND APPLICATIONS
RP GRAY SEALANT is recommended for sealing of joints and cracks in concrete and asphaltic pavements and parking lots.
• Roadways
• Parking lots
• Driveways
• Airports

FEATURES AND BENEFITS
• Premium quality joint and crack sealing compound for concrete and
asphaltic pavements.
• Actually prolongs the pavement service life.
• Seals cracks and joints from water penetration.
• ASTM C920-11 application

EQUIPMENT
Recommended use is an agitated oil-jacketed unit that has separate temperature gauges for both the sealant and the heat transfer fluid. Constant agitation is necessary. Take the 30 lb. plastic bag of sealant and load into the kettle one at a time. Melt only enough material for the day's activities. Once melted, additional material can be added as needed. Material can be safely reheated within the sealants service life.

PREPARATION
To facilitate proper adhesion, the joint or crack should be dry and clear of any dirt, dust or other contaminates. Substrate and ambient temperatures must be 40º F or above. Proper sizing of the joint will cause the maximum extension/compression to not exceed 50% of the width. Joints or random cracks of 1/4" or less are difficult to properly clean prior to applying the sealant.

 

 
 

SERVICE LIFE
The service life (pot-life) at application temperatures is approximately 12 hours. Adding fresh material to the melter as sealant is being used will extend the service life. Any material that has exceeded the service life should be removed from the melter and discarded.

COVERAGE

Width
Depth
Pounds/100 Lineal Feet
3/8"
3/8"
6.9
3/8"
1/2"
9.3
1/2"
1/2"
12.3
1/2"
1"
24.7
3/4"
1/2"
18.6
3/4"
3/4"
27.8

PACKAGING
35# CARTON
60 CARTONS PER PALLET

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe, LLC. (888) 755-5700.

LIMITED WARRANTY
Every reasonable effort is made to apply Right Pointe, LLC. exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, Right Pointe, LLC. MAKES NO WARRANTY OR GUARANTEE,EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and Right Pointe, LLC. shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the Right Pointe, LLC. Technical Manager.

 

 
   

ABOUT US

 

OUR PRODUCTS
Expansion Joints and Plastics
Waterproofing

Joint Sealants
Chemical Liquids
Cementitous Products
Roofing

 

CONTACT US

 

FEATURED PRODUCTS

 

CAREERS

 
© 2017-2019 All Rights Reserved Right Pointe, LLC.