Right Stop Silane 40
Right Stop Silane 40

 

  Right Stop Silane 40
SDSspacerPDF

 

DESCRIPTION
RIGHT STOP SILANE 40 is a breathable, colorless, non-staining, ready to use, deep penetrating concrete and masonry water repellent compound. It protects, stone, brick and block against the damaging effects of deicing chemicals, water intrusion, freeze-thaw exposure and airborne contaminants such as industrial fumes, smog and acid rain. RIGHT STOP SILANE 40 protects without altering the appearance or texture of the treated surfaces. RIGHT STOP SILANE 40 produces a non-filming water repellent surface while penetrating deep into the capillaries of the subsurface. Chemical reactions with the capillaries form long lasting water repellent groups that crosslink into a silicone compound.

USE AND APPLICATIONS
• Sidewalks and ramps
• Exposed aggregate
• Precast, pre-stressed and poured in place concrete
• Parking and bridge decks
• Industrial floors
• Lightweight and air entrained concrete

FEATURES AND BENEFITS
• Seals concrete against moisture and deleterious salts
• Extends service life of reinforced concrete
• VOC compliant
• Reduces spalling and scaling

PACKAGING
• 5 Gallon Pail
• 55 Gallon Drum

Coverage Rates
Surface Type Sq ft/gal per coat
Smooth concrete..............................................................................150-250
Exposed aggregate..........................................................................100-200
Bridge decks/ramps/driveways.......................................................100-150
Resealing bridge decks/ramps.......................................................150-250

APPLICATION PROCEDURES
RIGHT STOP SILANE 40 should be applied using airless spray equipment. A garden sprayer may be used for smaller projects only when an airless sprayer is not available. Do not use pressure pot or lacquer type paint sprayers. To product the proper material flow, reduce air pressure on pumping equipment and use spray tips with orifice sizes no smaller than 0.0l5" (0.9cm). Larger tips may be required with some spray equipment to get desired material flow. Flood the surface with RIGHT STOP SILANE 40 using a low pressure sprayer, roller or broom. Distribute material evenly. After the surface absorbs the RIGHT STOP SILANE 40, apply a second coat before the surface dries. Do not allow the material to puddle.

CLEAN UP
Clean drips, runs, and overspray residue while still wet, using detergent and water. Dried material may require mechanical abrasion for removal. Clean application and spray equipment with detergent and water immediately following use.

 
 

RESTRICTIONS
Store at temperature between 40˚ F to 90˚ F (4˚C to 32˚C). Do not dilute.
Do not allow to puddle. All products should penetrate the substrate with no surface build-up.
Do not apply to a frost filled surface or when the temperature is below 40˚F (4˚C).
Do not apply if rain is expected within 12 hours.
Do not apply to non-absorbent surfaces such as glass, metal, glazed brick or tile.
Use in a well ventilated area. Avoid breathing vapors or mist.
Consult Material Safety Data Sheet for complete product information.

Warnings
Do not contaminate with solvents.
Water based. Do not allow to freeze.
Use only when concrete temperature exceeds 40° F for 24 hours.

typical properties
Weight per gallon......................................................................6.88 lbs/gal
Resistance to UV.............................................................................Excellent
Abrasion resistance.........................................................................Excellent
Drying time...............................................................................2 to 4 hours
Storage................................................................... 40º F to 90º F (4º C-32º C)
Shelf life.......................................2 years in original unopened containers.

MATERIAL PROPERTIES

ASTM E514-90 Regular Heavy Duty
Reduction in water leakage    
Brick --------------- 100%
Block --------------– >92%
VOC 25 gms/liter 50 ms/liter

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe, LLC (888) 755-5700.

LIMITED WARRANTY
Every reasonable effort is made to apply Right Pointe, LLC exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant out products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, Right Pointe, LLC MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and Right Pointe, LLC shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. user shall determine the suitability of the products for the intended use and assume all risks and liabilities in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the Right Pointe, LLC Technical Manager.

 

   

ABOUT US

 

OUR PRODUCTS
Expansion Joints and Plastics
Waterproofing

Joint Sealants
Chemical Liquids
Cementitous Products
Roofing

 

CONTACT US

 

FEATURED PRODUCTS

 

CAREERS

 
© 2017-2019 All Rights Reserved Right Pointe, LLC.