Right Grout Supreme

Right Grout Supreme
Non-Shrink High Strength Grout


 

  Right Grout Supreme
SDSspacerPDF

 

DESCRIPTION
RIGHT GROUT SUPREME is a pre-blended, non-shrink, non-ferrous, high strength grout which can be used from dry pack to flowable consistencies and to compensate for the normal shrinkage of mortar and concrete and to absorb the vibrations on foundations.

USE AND APPLICATIONS
• Structural columns
• Machinery bases
• Post tension cables
• Dowel and rebar replacement
• Precast tee joints.

FEATURES AND BENEFITS
• Use from dry pack to high flow
• Controlled expansion
• Non-metallic
• High strength
• Contains no added chloride
• Meets requirements of CRD C-621

PACKAGING
• 50 lb Bag

Coverage Rate
• One (1) 50 lb bag will yield approximately .45 cubic feet

APPEARANCE
• Gray

SHELF LIFE
• Minimum of one (1) year stored in dry protected storage

DIRECTIONS FOR USE
All areas to be grouted shall be clean and free of oil, grease, dirt and all contaminates. Thoroughly saturate the area to be grouted with water prior to the placement of RIGHT GROUT SUPREME.

MIXING
Recommended water ratio per 50 lb Bag of RIGHT GROUT SUPREME is as follows:

Dry Pack 5.80 pints Stiff 6.30 pints
Plastic 6.80 pints Pourable 7.45 pints
Pump able 7.65 pints

Mix RIGHT GROUT SUPREME with a mortar mixer. Mix for 3 to 5 minutes. Place immediately.

APPLICATION
RIGHT GROUT SUPREME should be placed in accordance with ACI standard procedures.

CLEAN UP
Clean tools immediately with water after use.

RESTRICTIONS
Do use when temperatures are between 40° F and 70° F.
Do use cold water.
Do not over water.
Do not apply to frozen ,frost filled or hot surfaces.

 
 

MATERIAL PROPERTIES

Right Grout Supreme complies with the following specifications:
CRD-C588-78, CRD-C266, CRD-C621-81, CRD-C614-80, CRD-C277,
ASTM-C190, ASTM-C348

WORKING PROPERTIES / TECHNICAL DATA (APPROXIMATE)
Initial Set per CRD-C81 70 minutes at 70º F (21º C.)
Final Set per CRD-C82 120 minutes at 70º F (21º C.)
Complies with ASTM C-1107 Grade B, ASTM C-109, ASTM C-348, CRD-C588, CRD C621, CRD C226, CRD C266, ASTM C588, AASHTO T-161B.
Compressive Strength
CRD-227
Plastic
Pourable
Flowable
1 Day
5240 psi
4980 psi
4810 psi
 
36.68 mpa
34.86 mpa

33.67 mpa

3 Days
8360 psi
7030 psi
7440 psi
 
58.52 mpa
49.21 mpa
52.08 mpa
7 Days
8710 psi
8450 psi
8270 psi
 
65.38 mpa
60.97 mpa
57.89 mpa
28 Days
11290 psi
11060 psi
10820 psi
 
79.03 mpa
77.42 mpa
75.74 mpa
Plastic Consistency
Tensile Strength
ASTM C190
Flexural Strength
ASTM C348
7 Days
530 psi
1470 psi
 
3.71 mpa
10.29 mpa
Pull out test #9 rebar
@60,000 lbs for
1 minute
12"
depth:
18"
depth:
Controlled
Expansion
CRD-621
24 Hours
Pass
Pass
+0.02%
7 Days
Pass
Pass

+0.02%

14 Days
Pass
Pass
+0.03%
Total Chloride Ion Content
PPM
Cl- lbs/yd3
 
110
0.4

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe, LLC (888) 755-5700.

LIMITED WARRANTY
Every reasonable effort is made to apply Right Pointe, LLC exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, Right Pointe, LLC MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and Right Pointe, LLC shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the Right Pointe, LLC Technical Manager.

 

 
   

ABOUT US

 

OUR PRODUCTS
Expansion Joints and Plastics
Waterproofing

Joint Sealants
Chemical Liquids
Cementitous Products
Roofing

 

CONTACT US

 

FEATURED PRODUCTS

 

CAREERS

 
© 2017-2019 All Rights Reserved Right Pointe, LLC.