RIGHT SHEEN WB 30 CONCRETE CURING AND SEALING COMPOUND is a high solids, high luster, water based coating; it utilizes a modified acrylic polymer base to form a watertight seal on concrete surfaces.
This environmentally friendly VOC compliant compound is designed to provide maximum curing and sealing to freshly laid interior/exterior concrete paving applications.
• ASTM-C 1315, Type I, Class A
• ASTM-C 309, Type I, Class B
• AASHTO M148, Type I, Class B
• National AIM VOC Regulations
RIGHT SHEEN WB 30 is suitable for use with a wide variety of concrete construction projects. It is also ideal for many sizes of interior/exterior concrete slab work, as well as other flatwork applications.
• Commercial and industrial flooring
• Driveway & garage flooring
• Concrete pavement
• Low odor
• Use as a curing compound or sealer
• Ideal for interior applications
• VOC compliant
• 1 Gallon 6 Pack
• 5 Gallon Pail
• 55 Gallon Drum
Cure & seal new concrete....................................................200-300 sq ft/gal
Seal/dust proof old concrete.............................................300-400 sq ft/gal
For newly placed concrete, apply RIGHT SHEEN WB 30 when surface water has completely disappeared from the concrete slab. It is also recommended that application not be attempted until workmen cannot mar the surface.
For existing concrete, clean surface stains and clear the surface of debris; RIGHT SHEEN WB 30 will highlight surface defects. Temperature must be above 40° F for 24 hours before application.
RIGHT SHEEN WB 30 may be applied with a standard hand held sprayer or power sprayer; a short napped roller is recommended for brush application. Avoid puddling during application and restrict foot traffic for at least 4 hours (12 hours preferable) after application.
If a higher gloss coating is desired, additional coatings of RIGHT SHEEN WB 20 may be applied after the previous coating has completely dried; typically between 2 and 4 hours after the previous application.