Right Sheen WB 20
Right Sheen WB 20


  Right Sheen WB 20


RIGHT SHEEN WB 20 CONCRETE CURING AND SEALING COMPOUND is a water based coating that utilizes a modified acrylic polymer base to form a watertight seal on concrete surfaces.

This environmentally friendly VOC compliant compound is designed to provide maximum curing and sealing to freshly laid interior/exterior concrete paving applications.

• ASTM-C 309, Type II, Class B
• AASHTO M148, Type II, Class B
• National AIM VOC Regulations

RIGHT SHEEN WB 20 is suitable for use with a wide variety of concrete construction projects. It is also ideal for many sizes of interior/exterior concrete slab work, as well as other flatwork applications.
• Commercial and industrial flooring
• Driveway & garage flooring
• Concrete pavement
• Patio

• Non-yellowing
• Low odor
• Use as a curing compound and/or sealer
• Ideal for interior applications
• VOC compliant

• 1 Gallon 6 Pack
• 5 Gallon Pail
• 55 Gallon Drum

Coverage Rates
Cure & seal new concrete....................................................200-300 sq ft/gal
Seal/dust proof old concrete..............................................300-400 sq ft/gal

For newly placed concrete, apply RIGHT SHEEN WB 20 when surface water has completely disappeared from the concrete slab. It is also recommended that application not be attempted until workmen cannot mar the surface.

For existing concrete, clean surface stains and clear the surface of debris; RIGHT SHEEN WB 20 will highlight surface defects. Temperature must be above 40° F for 24 hours before application.

RIGHT SHEEN WB 20 may be applied with a standard hand held sprayer or power sprayer; a short napped roller is recommended for brush application. Avoid puddling during application and restrict foot traffic for at least 4 hours (12 hours preferable) after application. If a higher gloss coating is desired, additional coatings of RIGHT SHEEN WB 20 may be applied after the previous coating has completely dried; typically between 2 and 4 hours after the previous application.


Water based, incompatible with solvent containing products RIGHT SHEEN WB 20 will highlight underlying surface defects; ensure surface is clean and clear of debris before use. For optimum results, light mixing is recommended (excessive agitation will cause foaming).

Water based.
Do not allow to freeze.
Use only when concrete temperature exceeds 40° F for 24 hours.
Refer to the Safety Data Sheet for additional health and safety information.

For conditions not specified, application procedures not noted, contact: Right Pointe, LLC (888) 755-5700.

Every reasonable effort is made to apply Right Pointe, LLC exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant out products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, Right Pointe, LLC MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and Right Pointe, LLC shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liabilities in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the Right Pointe, LLC Technical Manager.







Expansion Joints and Plastics

Joint Sealants
Chemical Liquids
Cementitous Products







© 2017-2019 All Rights Reserved Right Pointe, LLC.