Protection Board Regular & Maximum Waterproofing
Protection Board Regular &
Maximum Waterproofing

 

  Protection Board Regular & Maximum Waterproofing
SDSspacerPDF

 

DESCRIPTION
PROTECTION BOARD is a semi-rigid board composed of a fortified asphalt core pressed between two layers of weatherproofed fiberglass plies.
• Used on both vertical and horizontal applications – above and/or below
grade uses
• Available in Regular (1/8") and Maximum (1/4") thickness
• Compatible with most roofing and waterproofing materials
• Resists puncture from jobsite traffic, backfilling operations and
aggregate overlay
• Easy to handle and install

SPECIFICATIONS
• ASTM D 6506

USE AND APPLICATIONS
PROTECTION BOARD is suitable for use with a wide variety of concrete and roofing construction projects. It is also ideal for many sizes of concrete slab work, as well as other flatwork.
• Roof decks
• Parapet walls
• Plaza terraces
• Utility/mechanical rooms
• Foundation walls
• Tunnels & below grade concourses
• Sub-flooring
• Landscaping details

PACKAGING
• 4’ x 8’ Sheet
• Regular - Nominal thickness 1/8”
160 sheets per pallet
• Maximum - Nominal thickness 1/4”
80 sheets per pallet

thickness
• 1/8"-Regular
• 1/4"-Maximum

PACKAGING
• 4' x 8' Sheet ......................................1/8" Thick ................160 Sheets per pallet
...............................................................1/4" Thick.................. 80 Sheets per pallet

PRECAUTIONS
• Do not double stack pallets of PROTECTION BOARD at risk of the panels
sticking together
• Keep PROTECTION BOARD stacked on pallets and/or stored on a level
surface to prevent panel warping prior to application
• Exposure to sunlight when stored on the jobsite prior to use is not harmful
to the product

 

 

 
 

TYPICAL PROPERTIES

TYPE 2
TYPE 3
Puncture Strength
(Classes A&B)
312 N (70 lbf)
minimum
365 N (82 lbf)
minimum
Thickness
(Classes A&B)
2.4 to 3.9 mm
(0.095 to 0.155 in.)
5.6 to 7.1 mm
(0.220 to 0.280 in.)
Water Absoption
(Classes A&B)
10.0% Maximum
10.0% Maximum
Asphalt,
% by weight
(Class A)
65% minimum
65% minimum
Asphalt,
% by weight
(Class B)
40% minimum
40% minimum
Resistance to
Decay
(Class A&B)
Meets puncture
requirements after
completion of test
Meets puncture
requirements after
completion of test

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe, LLC. (888) 755-5700.

LIMITED WARRANTY
Every reasonable effort is made to apply Right Pointe, LLC. exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, Right Pointe, LLC. MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and Right Pointe, LLC. shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the Right Pointe, LLC. Technical Manager.

 

 

 

CLICK ON PHOTO TO ENLARGE
1

1

   

ABOUT US

 

OUR PRODUCTS
Expansion Joints and Plastics
Waterproofing

Joint Sealants
Chemical Liquids
Cementitous Products
Roofing

 

CONTACT US

 

FEATURED PRODUCTS

 

CAREERS

 
© 2017-2019 All Rights Reserved Right Pointe, LLC.