Multi-Ply Vapor Mat
Multi-Ply Vapor Mat


 

  Multi-Ply Vapor Mat
SDSspacerPDF

 

DESCRIPTION
MULTI-PLY VAPOR MAT is a semi-rigid high-melt asphaltic panel encapsulated around various layers of fiberglass scrim designed for use in vapor proofing applications requiring a water vapor transmission (WVT) rate of 0.0000 grains per square foot per hour.
• Resists water/vapor infiltration
• Can be installed on slab or grade
• Anti-stick release coating factory applied to panels
• High durability prevents most incidental job site damage

use and APPLICATIONs
• Specifically designed for gymnasium & sport floor application (Ex: tile,
wood, seamless , resilient, etc.)
• Contractor option – overlap or butt joint
• Cut and form with roofer's knife, heat for bending
• Point and seal all edges and protrusions
• Hydrostatic head must be addressed in design phase

FEATURES AND BENEFITS
• Separates structure from site
• Horizontal use only
• Excellent for slab on grade construction
• Can be stored outside on site
• Apply right over compacted grade
• Monolithic panel (no up or down side)

PACKAGING
• 4' x 8' Sheet
• 160 sheets per pallet

COVERAGE
For estimation purposes use the actual area and an additional 20% to account for the overlap.

SEALANT
Use of a horizontal and/or non-sag asphalt mastic is required to effect a permanent bond between the panels and to seal any protrusions through the VAPOR MAT.

TYPICAL PROPERTIES
WATER VAPOR TRANSMISSION (WVT) CALCULATIONS:
(ASTM E96), (ASTM E154)

Tensile Strength                 (ASTM E154)                   156 lbs force/inch
Puncture Resistance          (ASTM E154)                           150 lbs force
Weight per sq ft                                                                         1.1 lb/sq ft

WVT = G/tA = (G/t)*A
G                    = weight change, grains
t                      = time during which G occurred, h
G/t                  = grains ÷ time
A                    = test area
WVT             = rate of water vapor transmission,
MULTI-PLY VAPOR MAT = 0.0000 WVT

 

 
 

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe, LLC. (888) 755-5700.

LIMITED WARRANTY
Every reasonable effort is made to apply Right Pointe, LLC. exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, Right Pointe, LLC. MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and Right Pointe, LLC. shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the Right Pointe, LLC. Technical Manager.

 

   

ABOUT US

 

OUR PRODUCTS
Expansion Joints and Plastics
Waterproofing

Joint Sealants
Chemical Liquids
Cementitous Products
Roofing

 

CONTACT US

 

FEATURED PRODUCTS

 
© 2017-2019 All Rights Reserved Right Pointe, LLC.