Joint Adhesive
Joint Adhesive
No. JTS-063

 

  Joint Adhesive
SDSspacerPDF

 

DESCRIPTION
JOINT ADHESIVE is formulated with selected asphaltic resins, synthetic polymeric rubber, plasticizers and stabilizers. This high viscosity material is a hot applied, one part joint adhesive that provides excellent results for extending longitudinal joint life expectancy.
• Superior bonding characteristics
• Flexible at low temperatures
• Excellent adhesive properties

TYPICAL PROPERTIES
Brookfield viscosity @ 400º F ...................................................4,000-10,000 cp
Penetration, 77º F ........................................................................................60-100
Flow at 140º F ........................................................................................5 mm max
Resilience, 77° F ......................................................................................30% min
Ductility, 77º F .........................................................................................30 cm min
Ductility, 39.2º F ......................................................................................30 cm min
Tensile adhesion ...................................................................................500% min
Flexibility, 0° F ..................................................................................................Pass
Softening point ......................................................................................170º F min
Asphalt compatibility ......................................................................................Pass
Minimum application temperature ............................................................380º F
Maximum heating temperature ..................................................................410º F

USE AND APPLICATIONS
JOINT ADHESIVE is used in constructing longitudinal joints in asphalt concrete pavements.

FEATURES AND BENEFITS
• High adhesion
• Excellent flexibility at low temperatures
• Extends life expectancy of longitudinal joints

EQUIPMENT
Use an agitated oil-jacketed unit that has separate temperature gauges for both the sealant and the adhesive and load into the kettle one at a time. Melt only enough material for the day's activities. Once melted, additional material can be added as needed. Material can be safely reheated within the sealants service life.

NOTE: Prolonged heating of the sealant above the maximum safe heating temperature may cause it to gel in the kettle.

PREPARATION
To facilitate proper adhesion, the working area should be dry and clear of any dirt, dust or other contaminates. Substrate and ambient temperatures must be 40º F or above.

SERVICE LIFE
The service life (pot-life) at application temperatures is approximately 12 hours. Adding fresh material to the melter as sealant is being used will extend the service life. Material that has been overheated can thicken and gel in the melter. Any material that has exceeded the service life should be removed from the melter and discarded.

 
 

COVERAGE
Density ...................................................................................................9.3 lbs/gal
Coverage on 2" overlay .............................................................................3-4 ft/lb

PACKAGING
60# CARTON (2 SPLIT 30# CUBES)
36 CARTONS PER PALLET

35# CARTON
60 CARTONS PER PALLET

30# NO BOX TRI-BLOCK UNIT
65 UNITS PER PALLET


***********Patent Pending***********

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe, LLC. (888) 755-5700.

LIMITED WARRANTY
Every reasonable effort is made to apply Right Pointe, LLC. exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, Right Pointe, LLC. MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and Right Pointe, LLC. shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the Right Pointe, LLC. Technical Manager.



 
 

ABOUT US

 

OUR PRODUCTS
Expansion Joints and Plastics
Waterproofing

Joint Sealants
Chemical Liquids
Cementitous Products
Roofing

 

CONTACT US

 

FEATURED PRODUCTS

 
© 2015-2020 All Rights Reserved Right Pointe, LLC.