Flex/Foam Expansion Joint
Flex/Foam Expansion Joint


 

  Flex/Foam Expansion Joint

 

DESCRIPTION
FLEX/FOAM Expansion Joint is an extruded closed cell plastic joint filler compounded from low density expanded polyethylene plastic foam. Resistant to chemicals and solvents, it has recovery properties of over 99%. Because of its cell make-up, it will absorb almost no water. FLEX/FOAM is chemically inert with no food value to attract or support plant or animal life.
• Premium joint filler
• Workable backup material for both horizontal and vertical applications
• Odorless and non-toxic
• Flexible over a wide temperature range

Specifications and Size Information
Conforms to or meets the following Specifications:
• Flex/Foam Meets The Performance Requirements of ASTM D 1752, Type I & ASTM D 545
• Various State D.O.T. Closed Cell Foam Standards

Thickness
Up to 6" in 1/2" increments

NOTE: Sheets over ¾" are laminated to thickness

Standard Lengths
• 5'
• 10'

Slab Width
48"

Cut to Size
2" to 48" in ½" increments

Color
Gray or White

USE AND APPLICATIONS
FLEX/FOAM serves as a premium joint filler and backup material for both horizontal and vertical applications accommodating expansion/contraction movements.
• Plaza decks
• Driveways
• Bridge approaches
• Sidewalks
• Industrial/commercial flooring
• Tilt-up construction

FEATURES AND BENEFITS
• Contractor friendly, environmentally acceptable
• Compresses readily, requires only a razor knife to install
• Non-gassing, clean, non-staining when installed
• Can be over-sealed with hot or cold applied sealants
• 99% recovery properties – retains no memory
• Handles corners and radius applications easily

 
 

TYPICAL PROPERTIES
Compression (to 50% of original) ..................................13PSI (240g/mm²)
Water absorption, volume % ....................................................................251
Recovery.............................................................................................. 99.25%
Extrusion ........................................................................................0.1"(2.5mm)
Working temperature....................................................... -70° F up to 410° F
(Tests conducted on 1/2" thick specimen – ASTM D 545)

TECHNICAL SERVICE
For conditions not specified, application procedures not noted, contact: Right Pointe, LLC. (888) 755-5700..

LIMITED WARRANTY
Every reasonable effort is made to apply Right Pointe, LLC. exacting standards both in the manufacture of our products and in the information which we issue concerning these products and their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, Right Pointe, LLC. MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and Right Pointe, LLC. shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the Right Pointe, LLC. Technical Manager.

 

CLICK ON PHOTO TO ENLARGE
1

   

ABOUT US

 

OUR PRODUCTS
Expansion Joints and Plastics
Waterproofing

Joint Sealants
Chemical Liquids
Cementitous Products
Roofing

 

CONTACT US

 

FEATURED PRODUCTS

 
© 2017-2019 All Rights Reserved Right Pointe, LLC.