#1109
#1190

 

  #1190
SDSspacerPDF

 

DESCRIPTION
#1190 Hot Applied Sealant is formulated with selected asphaltic resins, synthetic polymeric rubber, plasticizers, stabilizers, and a blend of organic reinforcing fillers.
This economical material is a hot applied, one part sealant that provides excellent results under extremely varying conditions. #1190 is the perfect joint and crack sealant for many applications.
• Superior bonding characteristics
• High resiliency and weather resistance
• Excellent results throughout freeze and thaw cycles

SPECIFICATIONS
• ASTM D-6690, type I
• ASTM D-1190
• AASHTO M-173
• FAA P - 605
• FED SPEC SS-S-164

TYPICAL PROPERTIES
Recommended pour temperature ..........................................................370º F
Maximum heating temperature ................................................................390º F
Recommended extended heating ........................................................6 Hours
Penetration (150gr/5 sec.) .......................................................................50 - 90
Softening point ...................................................................................176º F min
Bond (0º F/50% ext.) ................................................................Passes 5 cycles
Asphalt compatibility ........................................................................Compatible

USE AND APPLICATIONS
#1190 is recommended for sealing of joints and cracks in concrete and asphaltic pavements and parking lots. It is designed for use in sealing expansion and contraction joints as well as random cracks.
• Roadways
• Parking lots
• Airport runways

FEATURES AND BENEFITS
• Economical quality joint and crack sealing compound for concrete
and asphaltic pavements
• Effective preventative maintenance treatment
• Actually prolongs the pavement service life
• Seals cracks and joints from water penetration

EQUIPMENT
Use an agitated oil-jacketed unit that has separate temperature gauges for both the sealant and the heat transfer fluid. Take the 30 lb plastic bag of sealant and load into the kettle one at a time. Melt only enough material for the day's activities. Once melted, additional material can be added as needed. Material can be safely reheated within the sealants service life.

NOTE: Prolonged heating of the sealant above the maximum safe heating temperature may cause it to gel in the kettle.

PREPARATION
To facilitate proper adhesion, the joint or crack should be dry and clear of any dirt, dust or other contaminates. Substrate and ambient temperatures must be 40º F or above. Proper sizing of the joint will cause the maximum extension/compression to not exceed 50% of the width. Joints or random cracks of 1/4" or less are difficult to properly clean prior to applying the sealant.

SERVICE LIFE
The service life (pot-life) at application temperatures is approximately 12 hours. Adding fresh material to the melter as sealant is being used will extend the service life. Material that has been overheated can thicken and gel in the melter. Any material that has exceeded the service life should be removed from the melter and discarded.

 
 

COVERAGE

Width
Depth
Pounds/100 lineal feet
3/8"
3/8"
6.9
3/8"
1/2"
9.3
1/2"
1/2"
12.3
1/2"
1"
24.7
3/4"
1/2"
18.6
3/4"
3/4"
27.8

PACKAGING
60# CARTON (2 SPLIT 30# CUBES)
36 CARTONS PER PALLET

35# CARTON
60 CARTONS PER PALLET

30# NO BOX TRI-BLOCK UNIT
65 UNITS PER PALLET




***********Patent Pending***********

 
CLICK ON PHOTO TO ENLARGE
1
   

ABOUT US

 

OUR PRODUCTS
Expansion Joints and Plastics
Waterproofing

Joint Sealants
Chemical Liquids
Cementitous Products
Roofing

 

CONTACT US

 

FEATURED PRODUCTS

 

CAREERS

 
© 2017-2019 All Rights Reserved Right Pointe, LLC.